Advertisement
MOUNTING THE PHONE
Desk Mounting
Wall Mounting
(With or Without Wall Plate)
3
/
15
3
3
/
16
Note: The USOC number of the jack to be installed is
RJ11C (RJ11W for a wall jack).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to inform you
that parts inside the telephone present
a risk of electric shock.
This symbol is intended to alert you to
important
operating
instructions included in the papers with
the telephone.
USING THE PHONE
Modular
Telephone
Jack
Switch to
the type of service you have. If you
have pulse (rotary) service, you can
Short
switch to
Line Cord
tone services.
(supplied)
Press for special services
" (5 mm)
16
such as Call Waiting.
Press
last number dialed (up to
/
" (100 mm)
16
31 tone or 32 pulse digits).
" (5 mm)
and
servicing
TONE
or
PULSE
to match
during a call to use
TONE
to dial the
REDIAL
Plug the handset cord into
the jacks on the handset
and base.
RadioShack is a registered trademark used by Tandy Corporation.
Set
to
RINGER
HI/LO/OFF
high- or low-volume ring, or to turn
off the ringer. You can make calls
with the ringer off, and you can
receive calls if you hear another
phone on the same line ringing.
Press
FLASH
to produce a timed switchhook sig-
nal for special services such as Call Waiting.
Note: If you do not subscribe to any special ser-
vices, pressing
FLASH
Press
VOLUME
to adjust the volume to a comfortable
listening level — normal, high, or the highest.
© 2000 Tandy Corporation.
All Rights Reserved.
for a
Press to hang up.
might disconnect the call.
Advertisement
