Mounting The Phone; Using The Phone - Radio Shack ET-501 Owner's Manual

MOUNTING THE PHONE

Desk Mounting
Wall Mounting
(With or Without Wall Plate)
Handset Holder
(Wall Mounting)
Note: The USOC number of the jack to be installed is
RJ11C (RJ11W for a wall jack).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to inform you
that parts inside the telephone present
a risk of electric shock.
This symbol is intended to alert you to
important operating
instructions included in the papers with
the telephone.

USING THE PHONE

Switch to
you have. If you have pulse service, you can switch to
TONE during a call to use tone services.
Press to end a call.
Switch the ringer to sound or not to
sound. You can still make calls with
the ringer off, and you can receive
calls if you hear another phone on the
same line ringing.
Press to dial the last number dialed
(up to 31 tone or 32 pulse digits).
and servicing
or to match the type of service
TONE PULSE
Press for special services.
Press to end a call without
hanging up the handset.
RadioShack is a registered trademark used by Tandy Corporation.
ÐÐ
1997 Tandy Corporation.
All Rights Reserved.
Adjust the receiver's
volume as desired.
Plug the handset cord
into the jacks on the
base and handset.