Makita DVC860L Instruction Manuals page 8

Switch action
2
3
1. Stand-by switch 2. Power button 3. Suction force
1. Set the stand-by switch to the "I" side. The cleaner
gets into stand-by state.
To make the cleaner get into stand-by mode, press the
power button again.
To turn off the cleaner, set the stand-by switch to the
"O" side.
work need.
Suction power can be increased by turning the suc-
the symbol.
NOTICE:
when not using the cleaner for long time. The
cleaner consumes power during stand-by state.
Auto-suction stop during wet
model)
WARNING:
work.
a long time can cause overheat, resulting in the
cleaner deformation.
Do not pick up foam or soapy liquid. Picking
to using in this condition may cause an electric
shock and breakage of the cleaner.
from immersing into the motor when picking up more
than a certain amount of water.
When the tank is full and the cleaner no longer picks up
water, switch off the cleaner and empty the tank.
Locking or unlocking the caster
1
To lock the caster with a stopper, lower the stopper
lever and the caster no longer will rotate. To release the
caster from the locked position, raise the stopper lever.
Locking the caster is convenient when storing the
cleaner, stopping the work on the way and keeping the
cleaner still.
To operate the stopper, move it by hand.
NOTE:
symbol to
Carriage handle
When carrying the cleaner, carry it by holding the han-
dle on the head. The handle is retractable at the head
when not in use.
8 ENGLISH
1
1. Caster 2. Stopper lever 3.
4.
caster is unlocked. Moving the cleaner with the
caster in the locked position may cause damage
to the caster.
3
4
2