2.6.2 Change password
Enter the old password, and then enter the new password, and click "save".
2.6.3 Upgrade system
(1) Prepare the upgrade package;
(2) Click "browse" to locate the upgrade package file;
(3) Click "upload";
(4) The encoder needs to restart after upgrade. Click
restart the system. You can view the "system information" to check whether
the system upgrade is successful or not.
2.6.4 Change encoder IP address
(1) Enter new IP address;
(2) Click "change";
Copyright© Shenzhen Reach IT Co., Ltd.
REACH ENC120 VGA Encoder
User Manual
11 / 13
to