Operation
Switching On and Off
•
To switch the radio on, turn the On/Off switch
with volume controller
feel that a slight resistance has been overcome.
•
To switch the radio off, turn the On/Off switch
with volume controller
feel that a slight resistance has been overcome.
To control the Volume
•
Turn the On/Off switch with volume controller
q
to the left to increase the sound volume.
•
Turn the On/Off switch with volume controller
to the right to reduce the sound volume.
q
Radio functions
Switch the radio on.
Selecting a waveband
AM
•
Press the button
FM
resp. the button
reception.
•
Extend the FM wire antenna
Adjusting the frequency
•
Using the frequency regulator
desired frequency on the AM (kHz) resp. FM
(MHz) scale
a
.
•
Adjust the wire antenna
radio reception is optimal.
Displaying the date and time
Press the button SET
t
...1x, to show the set alarm time.
...2x, to show the date.
...3x, to show the running seconds.
After about 2 seconds the display reverts to its nor-
mal time display.
to the left, until you
q
q
to the right, until you
for medium wave (MW)
w
y
for short wave (VHF)
d
out.
u
adjust the
d
positioning so that
...
Adjusting Time and Date.
1.
Press one of the buttons MODE
The number of the month is shown.
2.
With the button SET
3.
Press one of the buttons MODE
The number of the date is shown.
4.
With the button SET
5.
Press one of the buttons MODE
The hour indicator appears.
6.
With the button SET
For time display in the 12 hour format, select
the hours 1-11 A for the hours of the forenoon
and the hours 12-11 P for the hours of the after-
noon.
For time display in the 24 hour format, select
the hours 0-23 H.
7.
Press one of the buttons MODE
The minute indicator appears.
8.
With the button SET
9.
Press one of the buttons MODE
The time display is now programmed.
Adjusting the alarm signals
You can programme an hour signal or an alarm
time to have yourself alerted with an alarm signal.
1.
Press the button MODE
alarm time adjustment.
2.
Press one of the buttons SET
to adjust the alarm sound for the alarm time
or the hour signal:
:
Alarm sound for alarm time
(Alarm signal for wake-up time)
:
Alarm sound for alarm time and hour
+
signal
(Alarm signal for wake-up time and for
each full hour)
:
Alarm sound for hour signal
(Alarm signal for each full hour)
no symbol:
no alarm time or hour signal programmed.
- 4 -
four times.
r
t
adjust the month.
r
.
adjust the date.
t
r
.
t
adjust the hour.
.
r
t
adjust the minute.
r
.
r
once, to display the
several times
t