Cisco Catalyst 3850 Deployment Manual page 22

Step 1. Verify the current licenses in Switch:
Switch# show license right-to-use summary
License Name
-----------------------------------------------
ipservices
apcount
apcount
-----------------------------------------------
Step 2. Deactivate the image-based license and the AP-Count license from Switch:
Switch# license right-to-use deactivate ipservices slot 1
% switch-1:stack-mgr:Reboot the switch to invoke the highest activated License
level
Switch#
*Mar
ipservices license has been cleared.
*Mar
reboot license level changed from ipservices to lanbase. Reboot the switch to
invoke the new license level.
Switch# license right-to-use deactivate apcount 50 slot 1
Switch#
*Mar
licenses are removed.
Step 3. Reload Switch and verify that the licenses are cleared:
Switch# show license right-to-use summary
License Name
-----------------------------------------------
lanbase
apcount
apcount
-----------------------------------------------
License Level In Use: lanbase
License Level on Reboot: lanbase
Evaluation AP-Count: Disabled
Total AP Count Licenses: 0
AP Count Licenses In-use: 0
AP Count Licenses Remaining: 0
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Type
permanent
base
adder
3 20:41:51.024: %SMN_HBL_LICENSE-6-LIC_EULA_CLEAR: 1 stack-mgr:
3 20:41:51.024: %SMN_HBL_LICENSE-6-LIC_CHANGE: 1 stack-mgr:
3 20:42:27.538: %SMN_HBL_LICENSE-6-AP_DEL: 1 stack-mgr:
Type
permanent
base
adder
Count Period left
N/A Lifetime
0 Lifetime
50 Lifetime
Count Period left
N/A Lifetime
0 Lifetime
0 Lifetime
EULA for
Switch 1
0 adder AP-count
Page 22 of 36