Cisco Catalyst 3850 Deployment Manual page 10

[2]: Preparing packages list to delete ...
[1]: Files that will be deleted:
[2]: Files that will be deleted:
[1 2]: Do you want to proceed with the deletion? [yes/no]: y
[1 2]: Clean up completed
Boot Loader Upgrade
The Cisco Catalyst 3850 Switch shipped from manufacturing is configured to autoboot Cisco IOS XE Software from
the built-in flash and display the autoconfiguration dialog. In special circumstances a boot loader upgrade might be
necessary for a Cisco IOS XE Software image upgrade.
These are the steps to upgrade a Cisco Catalyst 3850 Switch boot loader image:
Step 1. Enable manual boot and power cycle the switch.
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
cat3k_caa-infra.SPA.03.07.00E.pkg
cat3k_caa-iosd-universalk9.SPA.152-3.E.pkg
cat3k_caa-platform.SPA.03.07.00E.pkg
cat3k_caa-wcm.SPA.10.3.100.0.pkg
packages.conf
In use files, will not delete:
cat3k_caa-base.SPA.03.07.00E.pkg
cat3k_caa-drivers.SPA.03.07.00E.pkg
cat3k_caa-infra.SPA.03.07.00E.pkg
cat3k_caa-iosd-universalk9.SPA.152-3.E.pkg
cat3k_caa-platform.SPA.03.07.00E.pkg
cat3k_caa-wcm.SPA.10.3.100.0.pkg
packages.conf
cat3k_caa-base.SPA.03.03.03SE.pkg
cat3k_caa-drivers.SPA.03.03.03SE.pkg
cat3k_caa-infra.SPA.03.03.03SE.pkg
cat3k_caa-iosd-universalk9.SPA.150-1.EZ3.pkg
cat3k_caa-platform.SPA.03.03.03SE.pkg
cat3k_caa-universalk9.SPA.03.07.00.E.152-3.E.bin
cat3k_caa-wcm.SPA.10.1.130.0.pkg
packages.conf.00-
cat3k_caa-base.SPA.03.03.03SE.pkg
cat3k_caa-drivers.SPA.03.03.03SE.pkg
cat3k_caa-infra.SPA.03.03.03SE.pkg
cat3k_caa-iosd-universalk9.SPA.150-1.EZ3.pkg
cat3k_caa-platform.SPA.03.03.03SE.pkg
cat3k_caa-universalk9.SPA.03.07.00.E.152-3.E.bin
cat3k_caa-wcm.SPA.10.1.130.0.pkg
packages.conf.00-
Page 10 of 36