BenQ GW2470H Service Manual page 50

Item
Allows the monitor settings to be set through the software on the
DDC/CI
PC.
When this function is activated, HDMI port will be in the input
HDMI Auto
auto select loop. Otherwise, HDMI can only be selected by
Switch
input select or by hot key.
Sets the time to power off the monitor automatically in power
Auto Power
saving mode.
Off
Sets whether to display the resolution notice of the
Resolution
recommended resolution when a new input source is
Notice
detected by the monitor.
Displays the current monitor property settings.
Information
Resets all mode, color and geometry settings to the
Reset All
factory default values.
Function
DDC/CI, short for Display Data Channel/Command
Interface, which was developed by Video
Electronics Standards Association (VESA). DDC/CI
capability allows monitor controls to be sent via the
software for remote diagnostics.
50
Range
•
ON
•
OFF
•
ON
•
OFF
•
OFF
•
10min.
•
20min.
•
30min.
•
ON
•
OFF
•
Input
•
Current
Resolution
•
Optimum
Resolution
(best with the
monitor)
•
Model Name
•
YES
•
NO