1. SAFETY INFORMATION
This multimeter has been designed according to IEC-1010 concerning electronic measuring
instruments with an overvoltage category (CAT II) and pollution 2.
Follow all safety and operating instructions to ensure that the meter is used safely and is kept in
good operating condition.
1.1 INTRODUCTION
• When using the meter, the user must observe all normal safety rules concerning:
- Protection against the dangers of electrical current.
- Protection of the meter against misuse.
• Full compliance with safety standards can be guaranteed only if used with test leads supplied. If
necessary, they must be replaced with the same model or same electric ratings. Measuring leads
must be in good condition.
-1-