Operating Instructions; Measuring Voltage; Measuring Current - NexxTech 2211813 Operator's Manual

3. OPERATING INSTRUCTIONS

3.1 MEASURING VOLTAGE

1. Connect the black test to the COM jack and the red test lead to the V/Ω jack.
2. Set the function switch at V
or load under measurement.
3. Read LCD display. The polarity of red connection will be indicated when making a DC
measurement.

3.2 MEASURING CURRENT

1. Connect the black test lead to the COM jack and the red test lead to the mA jack for a maximum
of 500mA. For a maximum of 10A, move the red lead to the A jack.
2. Set the function switch at
ACA measuring mode.
or V ~ range to be used and connect test leads across the source
A, mA or A range to be used and push
µ
/ ~ button to select DCA of
-11-