Configuration; Initial Connection To The Router; Connecting Via Usb - D-Link DWR-933 User Manual

Section 2 - Installation
This section will show you how to configure your new D-Link mobile router using the configuration utility that can be obtained through a software
interface or a web-based user interface.
When configuring the router for the first time, you will need to establish a direct connection with the router in order to access the web-based
configuration utility. This can be done using the included USB cable, or by connecting wirelessly to the DWR-933, as described in Connecting
via Wi-Fi on page 9. Once you have configured your router, you will be able to connect using the Wi-Fi settings that you have specified in the
configuration process. Ensure that the router is powered on and has sufficient battery power before commencing the setup process.
To connect to the router via USB, plug the provided micro USB cable into the micro USB port on the side of the router, then plug the other end
into an available USB port on your computer. Your router is now ready for configuration; please refer to the Configuration Utility on page 13
to continue the setup process.
D-Link DWR-933 User Manual

Configuration

Initial Connection to the Router

Connecting via USB

8