Installation - Electrical And Ice Machine Assembly - Scotsman HD22 User Manual

Installation - Electrical and Ice Machine Assembly

The dispenser is supplied with a power cord. Do not use with an extension cord. The unit must be plugged into a
properly grounded outlet.
The distance of the contact opening allows complete disconnection in terms of overvoltage category III.
The devices for disconnection must be incorporated in the power supply line in accordance with the wiring
rules.
The dispenser must be installed so that it is a separate piece of equipment from the ice machine. The drains and
electrical supply must be separate.
Leave a minimum space of 150 mm from walls to allow enough air circulation
The maximum and minimum ambient temperatures for correct operation are a minimum of 10 degrees C and a
maximum of 40 degrees C.
The appliance is not suitable for installation in an area where a water jet could be used.
Follow All Local State and National Codes
Ice Machine
All models: Place the dispenser in the location where it will be used. Level the top edge of the dispenser front to
back and left to right.
Sanitize the dispenser bin with a locally approved sanitizer.
Place the ice machine on the dispenser and secure it to the dispenser with the hardware and straps from the ice
machine. Install it according to the instructions in the manual included with the ice machine.
6