Talk Group Id's; Storing Talk Group Id's - Radio Shack PRO-92 Owner's Manual

20-522.fm Page 60 Friday, September 17, 1999 12:46 PM
B
L
O
C
9 10 11
K
4 S0 S0 S0
5 S0 S0 S0
6 S0 S4 S0
7 S0 S4 S0
7. Enter the size code and press
If you make a mistake, press
rect size code.
Note: The default setting of the bank is for Motorola
Type II. However, after you set Type I and if you
want to return to Type II, press
8. To confirm the input, repeat Steps 1–6 and press
. Each time you press
ENTER
size code. If you find an error, press
again at Step 1.

TALK GROUP ID'S

You can program up to 100 talk group ID's in each bank.
When the scanner stops on a transmission in the LTR,
Motorola, or EDACS mode, it checks to see if the ID has
been stored. In the Closed mode, the scanner only stops
on the transmission and displays its text tag if you have
stored and not locked out the ID. In the Open mode, the
scanner always stops on a transmission, but it displays
the ID's text tag if you have stored the ID.

Storing Talk Group ID's

To store a talk group ID when scanning, press
when the scanner stops on a transmission. The bottom
line changes to ID#XXXX
60
Size Code
12 13 14 15
S0 S4 S4 S11
S0 S0 S4 S0
S0 S0 S12 S12
S4 S0 — —
for each entry.
ENTER
and enter the cor-
CL
at Step 5.
15
, you confirm the
ENTER
and begin
CL
indicating that the ID is stored.
16
S0
S0
S12
—
TRUNK