Changing The Frequency Step; Using The Attenuator - Radio Shack PRO-92 Owner's Manual

20-522.fm Page 54 Friday, September 17, 1999 12:46 PM

CHANGING THE FREQUENCY STEP

The scanner searches at a preset frequency step for
each frequency range. Press
crement when moving between frequencies of a search
band or follow these steps to change steps in a specific
bank.
1. Press .
SEARCH
2. Select a bank.
3. Press then
FUNC STEP
Line 3.
4. Press continuously until you reach the desired
STEP
step.
5. Press then
FUNC STEP
These are the changeable frequency steps your scanner
uses for each frequency range.
Range (MHz)
29.000-54.000
108.000-136.9875
137.000-174.000
380.000-512.000
806.000-823.9875
849.000-868.9875
894.000-960.000

USING THE ATTENUATOR

To reduce interference or noise caused by strong signals,
you can reduce the scanner's sensitivity to these signals.
Press until appears on the display to reduce the
A
ATT
scanner's sensitivity on the current channel.
54
to change the step in-
STEP
. **PAUSED** displays on
to return to scanning.
Search Step (kHz)
5, 10, 15, 20, 25, 30, 50, 100
12.5, 25, 50, 100
5, 10, 15, 20, 25, 30, 50, 100
12.5, 25, 50, 100
12.5, 25, 50, 100
12.5, 25, 50, 100
12.5, 25, 50, 100