Setting The Signal Stalker Options - Radio Shack PRO-2051 User Manual

Beyond the Basics
the same time in the same area, or if the transmitter is a
broadcast television station.

setting the signal stalker options

1. Press FUNC then press and hold
the following signal stalker options appears:
• S-S.bnd: Lets you select the signal stalker band.
• S-S.ALt: Lets you select the signal stalker alert
settings.
• S-S.PS: Lets you select the pager screen settings.
2. Repeatedly press
then press E. If you selected S-S.bnd, one of the following
band names appears:
• Bnd Lo: VHF Low Band (25.0000 - 54.0000 MHz)
• Bnd Air: AIR Band (108.0000 - 136.9875 MHz)
• Bnd Hi: VHF High Band (137.0000 - 174.0000 MHz)
• Bnd UHF: UHF Band (400.0000 - 512.0000 MHz)
• Bnd 800: 800MHz Band (806.0000 - 956.0000 MHz)
If you selected S-S.Alt, skip to Step 5. If you selected S-
S.PS, skip to Step 7.
3. Repeatedly press
appears, then press E to select it. Otherwise, press ./CLR
if you do not want to select it. The scanner displays the
following options:
• Lo On or Lo OFF
• Air On or Air OFF
for 2 seconds. One of
or to select the option you want,
e d
or until the band you want to search
e d
43