Table of Contents
Advertisement
BlueNAC-3000
®
What's Bluetooth
technology?
®
Bluetooth
is a communication protocol based on RF technology that enables voice and data between devices
via a secure radio frequency link and globally free (2.4 GHz). Devices that implement it can communicate with
them when are within reach. Communication takes place so that the devices do not have to be aligned and
may even be in separate rooms if the transmission power allows.
®
BlueNAC-3000
uses this technology to establish intercommunication between two identical devices,
configured as Pilot and Copilot, reaching up to 30 m.
Another device called BlueNAC-3000 RADIOLINK, extends the system capabilities to allowing radio
communication, also wireless.
FEATURES OF BlueNAC-3000
•
®
Bluetooth
version 2.1 (Headset/Handsfree profiles)
•
Noise and echo cancellation cVc (Clear Voice Capture)
•
Voice monitor control "Sidetone" is independent of overall volume.
•
Adjustable VOX control. Automatic activation of communication through of voice.
•
Storing of 5 devices (mobile phones, GPS, etc)
•
Incorporates PTT bottom to radio TX through BlueNAC-3000 RADIOLINK device.
•
Lithium-ion battery 500 mA/h. up to 8 hours talk time and 150 hours in standby mode.
•
Software upgradeable via USB port.
DESCRIPTION AND OPERATION
[!] Attention:
Before using this device the first time, remember to charge the battery at maximum (about 3 to
4 hours). To do it use the included charger and connect it through the USB port. The red LED will remain on
until the end of the charge. Once charged, the battery provides a range of 8 to 12 hours depending on usage
and time at rest.
To access the USB connector must first remove the
rubber cap that covers it. Enter your fingernail or a
small screwdriver, about two millimeters below the
tab indicating the extraction point. Remove the cap
without forcing a centimeter, enough to insert the
connector of the charger.
The battery reaches its full capacity after several
charges and after the first charge its no needed to
wait to download completely before recharging, nor
do we need to wait for it to load completely to use the
intercom.
The intercom BlueNAC-3000 has 4 buttons and 2
LEDs (red and blue). They are located at the top and arranged to be comfortable handling, even with gloves.
Each key can perform different functions depending on the time it is held down and the way in which the
device is found. Distinguishes between two types of pulsations for basic use of the keyboard: Normal (or
short) and long press of approximately 3 seconds.
Switch On and Off the BlueNAC-3000
on and off by pressing and holding the ON/OFF key for 3 seconds.
BlueNAC-3000 turned
Switch On: Press and hold ON/OFF key for 3 seconds until turn on one of the two LEDs. If the LED blue
blinks, this indicates that it is configured as Pilot. If instead this, the LED red blinks, it is configured as Co-pilot.
– User Guide English
®
®
3
Advertisement
Table of Contents
