Direct Search; Listening To Monitor Memories - Radio Shack PRO-2049 Owner's Manual

20-419.fm Page 20 Wednesday, March 24, 1999 2:43 PM
Note: You can change the direction of
either an automatic or manual search
by pressing or once.

Direct Search

Using direct search, you can enter a
frequency, then search for transmis-
sions above or below that frequency
within all of the frequency bands.
1. Press .
MANUAL
2. Use the number keys to enter the
frequency where you want to start
the search. Press • to enter the
decimal point.
3. Press or to search up or
down from the selected frequency.
d (direct) and
and the next available monitor
memory number flashes.
Note: If you entered an invalid
frequency in Step 2, the scanner
displays Error . Press
then repeat Steps 2 and 3.
20
4. When the scanner finds an active
LISTENING TO MONITOR
MEMORIES
or appear,
After you store frequencies into the
scanner's monitor memories, you can
listen to them by pressing
MONITOR
sired monitor memory.
Note: To listen to the monitor memo-
ries, the priority channel feature must
be turned off (see "Priority" on
Page 24).
,
CLEAR
frequency, you can do any of the
following:
• save the frequency into the cur-
rent monitor memory by press-
ing .
MONITOR
• continue searching or change
the search direction by pressing
or .
• stop searching and listen to
the frequency by pressing
. (hold) appears.
H
HOLD
To manually step through fre-
quencies one at a time after you
stop a search, repeatedly press
or . To continue search-
ing, either press
HOLD
and hold down
about 1 second.
then the number for the de-
or press
or for
,
MANUAL