Fcc Notice - Radio Shack PRO-2040 Owner's Manual

20-414.fm Page 4 Wednesday, August 4, 1999 11:12 AM
Your PRO-2040 can receive these bands:
Band
10-Meter Ham Band
VHF-Lo
6-Meter Ham Band
Aircraft
Government/Ham
VHF-Hi
Ham/Government
UHF-Lo
UHF-T (TV)
UHF-Hi
UHF-Hi
UHF-Hi

FCC Notice

Your scanner might cause radio or TV interference even when it is operating
properly. To determine if your scanner is causing the interference, turn off your
scanner. If the interference goes away, your scanner was causing it. Try to elim-
inate the interference by:
• Moving your scanner away from the receiver
• Connecting your scanner to an outlet that is on a different electrical circuit
from the receiver
• Contacting your local Radio Shack store for help
If you cannot eliminate the interference, the FCC requires that you stop using
your scanner.
Note: Mobile use of this scanner is unlawful or requires a permit in some areas.
Check the laws in your area.
This device complies with Part 15 of FCC Rules . Operation is subject to the fol-
lowing two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference
that may cause undesired operation.
4
Modulation Frequency Range
FM 29.00-29.7 MHz
FM 29.7-50.00 MHz
FM 50.00-54.00 MHz
AM 108-136.975 MHz
FM
FM
FM
FM
FM
FM 806-823.9375 MHz
FM 851- 868.9375MHz
FM 896.1125-956 MHz
Frequency
Step
5.0 kHz
5.0 kHz
5.0 kHz
12.5 kHz
137-148 MHz 5.0 kHz
148-174 MHz 5.0 kHz
406-450 MHz 12.5 kHz
450-470 MHz 12.5 kHz
470-512 MHz 12.5 kHz
12.5 kHz
12.5 kHz
12.5 kHz