White Light; Main Menu - HIKVISION DS-2CE71D8T-PIRL User Manual

3.2 LANGUAGE
Supports English, and Chinese.

3.3 WHITE LIGHT

The embedded white light source can be worked as the
visible alarm.
In the WHITE LIGHT, you can set the mode as ALARM,
or OFF.
3.3.1 ALARM
In the ALARM mode, you can select the TRIGGER
MODE as DVR, or CAMERA.
DVR
Select the TRIGGER MODE as DVR. In this way, the
alarm signal is sent from the DVR, and the camera
works as the alarm detector in the process. Besides, the
alarm type only supported by the DVR can also triggers
the visible alarm in the camera.
CAMERA
Select the TRIGGER MODE as CAMERA, the embedded
PIR module sends the alarm signal to the visible alarm
in the camera, when PIR module detected the alarm
source.
3.3.2 OFF
Select OFF to give up this function

3.4 MAIN MENU

3.4.1 AE (AUTO EXPOSURE)
Auto Exposure describes the brightness-related
parameters, which can be adjusted by BRIGHTNESS,
EXPOSURE MODE, AGC, and SENSE UP.
Figure 3-3 AE
BRIGHTNESS
Brightness refers to the brightness of the image.
You can set the brightness value from 1 to 10 to darken
or brighten the image. The higher the value is, the
brighter the image is.
EXPOSURE MODE
You can set the EXPOSURE MODE as GLOBAL, BLC, and
WDR.
 GLOBAL
GLOBAL refers to the normal exposure mode which
adjusts lighting distribution, variations, and
non-standard processing.
 BLC (Backlight Compensation)
BLC (Backlight Compensation) compensates light to the
object in the front to make it clear, but this may cause
the over-exposure of the background where the light is
strong.
When BLC is selected as the exposure mode, the BLC
level can be adjusted from 0 to 8.
 WDR (Wide Dynamic Range)