Advertisement
ColorVu DS-2CD2xx7G1-L(U) Supplement Light Configuration Quick Start Guide
SECTION 1: LED Supplement Light Brightness Configuration
When the camera is first supplied power, it performs a self-check with the supplement light at
NOTES:
full power, so avoid staring at it.
The LED supplement light will lock in the light-on state for an hour if is repeatedly switched five
times within a short period of time due to manual testing or ambient brightness changes.
1. Enter the following path to go to the configuration settings: Configuration > System > System
Settings > External Device.
1.1 Enable Supplement Light
Figure 1, Configuration > External Device: Enable Supplement Light
1.2 LED Light Brightness Adjustment
The LED Light Brightness can be set to Manual Mode or Auto Mode.
1.2.1 Manual Mode
1. Set the LED Light Brightness Adjustment to Manual Mode.
2. Adjust the LED Light Brightness level from 1 to 100 (0 means no brightness).
3. Default is level 15.
QSG DS-2CD2xx7G1-L(U) 070219NA
3
Advertisement
