Operating the
Bag-on-Demand Lever
The bag-on-demand feature allows you to either
collect or recycle grass and leaf clippings while the
grass bag is attached to the machine.
•
To bag the grass and leaf clippings, press the
button on the bag-on-demand lever and move the
lever forward until the button on the lever pops up
(Figure
16).
Figure 16
1. Bag-on-demand lever (in the recycling position)
Side-Discharging the Clippings
Use side-discharging for cutting very tall grass.
If the grass bag is on the machine and the bag-on-demand lever is in the bagging position, move the lever to the
recycling position; refer to
Installing the Side-Discharge Chute
Lift up the side deflector and install the side-discharge chute (A and B of
Operating the Bag-on-Demand Lever (page
•
To recycle or side-discharge the grass and
leaf clippings, press the button on the lever and
move the lever rearward until the button on the
lever pops up.
Important:
the engine, wait for all moving parts to stop,
and then remove any grass clippings and
debris from the bag-on-demand door and the
surrounding opening
move the bag-on-demand lever from 1 position
to another.
1. Clean here
g234642
14).
Figure 18
14
For proper operation, shut off
(Figure
17) before you
Figure 17
Figure
14).
g234643
g233435