Adjusting The Cutting Height - Toro 20355 Operator's Manual

Adjusting the Cutting Height

WARNING
Adjusting the cutting height may bring you into contact with the moving blade, causing
serious injury.
• Shut off the engine and wait for all moving parts to stop.
• Do not put your fingers under the housing when adjusting the cutting height.
CAUTION
If the engine has been running, the muffler will be hot and can severely burn you.
Keep away from the hot muffler.
Adjust the cutting height as desired. Set all the wheels to the same height; refer to
Figure 12
11
Figure 12.
g223084