Quick Start Guide; Download Flir Tools - FLIR G300 a User Manual

Hide thumbs Also See for G300 a:

Table of Contents

Quick start guide

Follow this procedure:

1. Connect the power, video, and Ethernet cables to the camera.

2. Connect the video cable from the camera to a display/monitor, and connect the power

cable to a power supply (10–28 V DC). Verify that video output is displayed on the

monitor.

3. Connect the camera to the network using the Ethernet cable.

4. Use FLIR Tools to set up and control the camera. For more information, see section

8.1 Download FLIR Tools, page 9.

FLIR Tools lets you quickly create professional inspection reports that clearly show deci-

sion makers what you've found with your IR camera.

Import, analyze, and fine-tune images easily. Then incorporate them into concise docu-

ments to share findings and justify repairs.

Go to the following website to download FLIR Tools:

http://support.flir.com/tools

#T559899; r. AB/35742/35742; en-US

Table of Contents