Wlan Configuration; Wlan Basic Configuration - C-Data CR200-1432R-B User Manual

Note:
the same as the name of the wireless signal.Refer to #8.1.
AP-Client mode:In this mode，WIFI router like a wireless card,we can use this router to
received to another router wifi singal (can access to
NIC to wifi router access to internet.
Application Places: Near place have a wireless signal, and the user know the wireless
signal password, the user's desktop computers want connect to the wireless signal to
access the Internet

8 WLAN Configuration

8.1 WLAN Basic Configuration

1. Login to WIFI router web main interface then click Advance->wireless ->basic,then config
wireless as follows parameter:
Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
Enlarged and the name of the wireless signal of the original wireless router is not
【Disable Wireless LAN Interface】 Don't click,the option is to open or close wifi function；
【Wireless Band Mode】Select default 2.4GHZ(B+G+N)；
【Wireless Combo Mode】We can select AP mode,client mode, WDS mode,AP+WDS
【Client Network Type]】Default is infrastructure;
【Service set identifier(SSID)】Config wifi SSID；
【Channel Band】It is better to select 20MHZ,because some PC don't support 40MHZ,if
we select 40MHZ or 20MHZ/40MHZ,some PC can't connect to wifi
sometimes；
【Channel Numbel】Default is Auto,we can select a suitable channel refer to surrounding
wifi environment；
【Broudcast SSID】Default is open this function,if we close,the wifi name will be hide；
【Wi-Fi MultiMedia(WMM】Defaule is open；
【Data Rate】Default is Auto；
【Associated Clients】Show the client which connect to WIFI router；
【Enable MAC Clone(Single Ethernet Client)】Use default,no need select；
internet).In this mode PC just connect
mode,recommend to select AP mode；
18