Content Note ............................1 Installation Precautions ....................1 Precautions for Use ....................... 1 Brief ............................3 Product Features ......................3 Product Specifications ....................3 Device Interface Definition ................... 4 LED Description ......................5 Device Connection ......................5 WIFI Router Local Web Login Management ................5 Physical Connection of WIFI Router And PC ...............
1 Note 1.1 Installation Precautions Do not place the equipment near flammable or conductive items, high temperatures (such as direct sunlight) or in wet conditions, or on a PC chassis, and check that the surrounding appliances are stable. Check the cable for aging. Check and verify that the AC or DC input voltage is within the permissible range of the device and that the polarity of the DC is correct.
Page 4
To ensure safety, do not open the enclosure of the device, especially when the device is powered up. Unplug the power supply before cleaning the equipment. Use a soft dry cloth to clean the equipment to avoid the use of liquids or sprays. ...
2 Brief The CR200-1432RB is a wireless router, support one wan port,four 100M lan port, double antennas integration to the 300M wireless access points , allows you to quickly set up a 300Mbps wireless network, and lets your computers can access to Internet.The wireless router is compatible with IEEE802.11b/g/n standard,have two external antenna which supports data rate up to 300 Mbps,with the characteristics of strong penetrating power and wide coverage, it provides users with more efficient data transmission protection.
2.4 LED Description Indicator Description On: The WIFI router is power on; Power status Off: The WIFI router is Power off; Blinking:Have device connect to wifi WLAN WLAN Status On:Wi-Fi function Opens Off:Wi-Fi function Close On: Ethernet connection is normal; Blinking: Data is being transmitted LANn LAN port status...
c) Open PC “cmd” windows and make sure that PC can ping the management IP (192.168.1.1) of WIFI Router. 3.2 PC Access the WEB of WIFI Router Make sure computers and WIFI router connected in # 3.1, open PC Web browser (IE, firefox, Google), copy and paste the WIFI router to access the URL:http://192.168.1.1, then pop-up WIFI router prompt login page as follows: Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
admin admin, Input WIFI router UserName: PassWord: Click “Log In” button. Then we can see setup guide as follows: #1. Set WIFI router web interface languae,support chinese and english #2、3. Set the WIFI router internet access method.support PPPOE,DHCP and STATIC IP. #4.
Information,then we can see WIFI router uptime,firmware version and build time information: 4.2 View WIFI Router LAN Port Information 1. Entry WIFI router web main interface,then click Status ->Status -> LAN Settings,then we can view LAN port manage IP address and mac address.: 4.3 View WIFI Router Wireless Information 1.
5 WIFI Router Internet WAN Configuration For the WIFI router the internet access method is use routing mode,internet wan configuration is important things.WIFI router support 5 method internet access ways:PPPoE、DHCP、Static IP address、PPTP and L2TP 5.1 Set WIFI Router PPPoE Access Internet Method Login WIFI router web main interface,then click“Router”,select“PPPOE”,then input “PPPOE Username”and“PPPOE Password”: After finshed all of the configuration,click ‘Save/Apply’...
Page 12
On the WIFI Router web main interface select Advance->network-> WAN Settings,then setting wan as follows parameter: 【WAN Connection Type】Select ‘PPPOE’ 【User Name】Input PPPOE account,the User Name provide by ISP 【Password】Input PPPOE password,the Password provide by ISP 【Service Name(AC)】Means service name,if we don’t know,needn’t fill in,it doesn’t effect access to internet 【...
After finshed all of the configuration,click ‘Save/Apply’ button to finish “PPPoE”setting. 5.2 Set WIFI Router DHCP Access Internet Method On the WIFI router web main interface,select ‘Router’,then select ‘DHCP’, After finshed all of the configuration,click ‘Save/Apply’ button to finish “DHCP”setting. On the WIFI Router web main interface select Advance->network->...
need clone mac address,select clean After finshed all of the configuration,click ‘Save/Apply’ button to finish “DHCP”setting. 5.3 Set WIFI Router Static IP Address Access Internet Method On the WIFI router web main interface,select ‘Router’,then select ‘STATIC IP’, then input ip address、subnet mask、default gateway Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055) Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055) Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506...
Page 15
After finshed all of the configuration,click ‘Save/Apply’ button to finish “Static IP” setting. On the WIFI Router web main interface select Advance->network-> WAN Settings,then setting wan as follows parameter:: 【WAN Connection Type】Select ‘Fixed IP’ 【IP Address】Set static ip address for internet wan connection 【WAN Connection Type】Set subnet mask address for internet wan connection 【WAN Connection Type】Set default gateway for internet wan connection 【MTU Size】The default is 1452;...
After finshed all of the configuration,click ‘Save/Apply’ button to finish “Static IP”setting. 5.4 View WIFI Router Internet WAN Connection Status On WIFI router web main interface select Advance -> Status -> status -> Wan Settings,in this interface,we can check the WIFI router whether get ip,if wan connect is successful and ip address information .etc: 6 WIFI Router LAN Port Configuration 6.1 LAN IP Address And DHCP Server Configuration...
After finshed all of the configuration,click ‘Save/Apply’ button to finish “LAN IP”setting. 6.2 View LAN Side Connect Client In WIFI router web main interface select Advance -> network -> LAN Settings -> Show Client,then we can view connected client via LAN port.: In WIFI router web main interface select Advance ->...
AP mode:In this mode,inset cable to router wan port,and we can access to internet,don’t need config router,but the wifi not encrypt,it is better to set encrypt for router. In AP mode,the router like a HUB,we can connect wireless to wireless,wierless to wire,wireless to WAN.it most common used to provide wifi access,such as connect wireless cards.
Note: Enlarged and the name of the wireless signal of the original wireless router is not the same as the name of the wireless signal.Refer to #8.1. AP-Client mode:In this mode,WIFI router like a wireless card,we can use this router to received to another router wifi singal (can access to internet).In this mode PC just connect NIC to wifi router access to internet.
【Enable Universal Repeater Mode】Select if you need; 2. After setting wireless configuration, click ‘Save/Apply’ button to finish setting. 8.2 WLAN Password Configuration we can set WLAN password through below two method: Login WIFI router web main interface,then config WIFI router SSID and password as follows: Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055) Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Page 22
After setting wireless password configuration, click ‘Save/Apply’ button to finish setting. Login router web main interface,then select Advance ->Wireless -> Security: 【Select SSID】Select wifi name which we want to encrypt; 【Encryption】Select a kind of encryption type; 【Authentication Mode】Default is personal; 【Pre-Shared Key Format】Select a kind of key format,default is ASCII;...
After setting wireless password configuration, click ‘Save/Apply’ button to finish setting. 8.3 Config Parental Control Strategy 1.Login WIFI router web main interface,then click Advance -> Wireless -> Green AP,then select “Enable Green Ap”,config “Date” and “Time”: 2.Click “Save/Apply” button to make config effect. 9 WIFI Router Management 9.1 Time Zone Config Login WIFI router web main interface,click Advance ->...
9.3 Firmware Upgrade Login WIFI router web main interface,click Advance -> Administration -> Firmware Upgrade,then click “Choose file” button,then click “Upgrade” button to ungrade firemware: Upgrade WIFI router need about four minuters,then WIFI router will auto reboot,don’t need reboot manually. 9.4 Reboot And Restore Default Settings WIFI Router Login WIFI router web main interface,click Advance ->...
WIFI router web interface again. Concluding Remarks Thanks for using products of Shenzhen C-Data Technology Co. Ltd. Contact Information: Company Address: 6 floor, Building 4 of South Area 2, Honghualing Industrial Park,...