After finshed all of the configuration,click 'Save/Apply' button to finish "Static IP"setting.
5.4 View WIFI Router Internet WAN Connection Status
this interface,we can check the WIFI router whether get ip,if wan connect is successful and ip
address information .etc:
6 WIFI Router LAN Port Configuration
6.1 LAN IP Address And DHCP Server Configuration
1. In WIFI router web main interface select Advance -> network -> LAN Settings,then config
parameter as follows:
Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
On WIFI router web main interface select Advance -> Status -> status -> Wan Settings,in
【IP address】Set local management IP address of WIFI router. The default IP address is
192.168.1.1
【Subnet mask】Set the mask of local management IP address of WIFI router
【DHCP Type】Default config is 'server',means open WIFI router dhcp function,if we need
close dhcp function,we can select 'Disabled'
【DHCP Client Range】Configure the IP address interval that allocated to the terminal. The
address interval must be on the same network segment as the
management IP address of the ONU.
【DHCP Lease Time】Config time which client hire ip address from DHCP server
【Static DHCP】Bind ip address to some NIC mac address,so this NIC can use fix bind ip
address access to internet
【DHCP Domain Name】If need name,we can fill in,if doesn't need,we doesn't need fill in
14