Set Wifi Router Dhcp Access Internet Method - C-Data CR200-1432R-B User Manual

After finshed all of the configuration,click 'Save/Apply' button to finish "PPPoE"setting.

5.2 Set WIFI Router DHCP Access Internet Method

#1:
After finshed all of the configuration,click 'Save/Apply' button to finish "DHCP"setting.
#2:
setting wan as follows parameter::
Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
On the WIFI router web main interface,select 'Router',then select 'DHCP',
On the WIFI Router web main interface select Advance->network-> WAN Settings,then
【WAN Connection Type】Select 'Auto config(DHCP)'
【Host Name】Means DHCP server name,if we don't know we can don't fill in,it doesn't
effect access to internet
【MTU Size】The default is 1452; we have to change to lower MTU, such as 1400, if we
can ping the DNS but not access the website via WEB broswer.
【DNS】Default way is automatic get DNS,when the automatic DNS not stable,we can set
DNS manually
【Clone MAC Address】If we need pretend our mac address to other MAC to access to
internet,we can open this function,input personate mac,if we don't
11