C-Data CR200-1432R-B User Manual page 12

#2:
setting wan as follows parameter:
Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
On the WIFI Router web main interface select Advance->network-> WAN Settings,then
【WAN Connection Type】Select 'PPPOE'
【User Name】Input PPPOE account,the User Name provide by ISP
【Password】Input PPPOE password,the Password provide by ISP
【Service Name(AC)】Means service name,if we don't know,needn't fill in,it doesn't effect
access to internet
【 Connect Type 】 Means PPPOE connection time,have three different type as
follows:Continuous,On Demand,Manually,default is Continuous
【Idle Time】When we select connect type is on demand,we can modify idle time,means
when disconnect PPPOE server,after idle time can connect pppoe server
again
【MTU Size】The default is 1452; we have to change to lower MTU, such as 1400, if we
can ping the DNS but not access the website via WEB broswer.
【DNS】Default way is automatic get DNS,when the automatic DNS not stable,we can set
DNS manually
【Clone MAC Address】If we need pretend our mac address to other MAC to access to
internet,we can open this function,input personate mac,if we don't
need clone mac address,select clean
10