Remote Administration Settings - NetCommWireless NB16DG Remote Administration Setup

5. Enter the external WAN IP address, subnet and port number that you wish to use for
remote administration. If you are unsure of the WAN IP address to use you can enter
0.0.0.0 / 0 signifying any IP address and subnet as shown in the example below.
6. Enter a tick in the Enable checkbox to enable remote administration and press the
Save button.
You should now be able to access your modem via the address: http://<your external
IP address>:<port number>
You can find your IP address by going to
http://www.whatip.com/
.