Docomo SH-07A Instruction Manual page 27

Moving pointer
■
In the stand-by display, in the Custom menu screen,
etc., move the pointer ([L], [K], etc.) up/down, left/
right or diagonally to select an item.
In some Custom menus, the pointer shape varies
or the pointer is not supported.
Select icons displayed in the stand-by display and
press t to perform the following action.
Stock icon: To check information details
i-Channel ticker: To display the channel list
Stand-by memo: To display the Stand-by memo
input screen
Popup message: To activate i-concier
Stand-by clock (when Clock display is set to
[ON(Large)]): To activate Schedule
The pointer moving speed varies depending on the finger sliding speed.
■ Moving cursor
In the Basic menu or Submenu screen, move the
cursor up/down and left/right in the same way as w
of Multi-guide key.
When there are multiple pages, move the cursor to
switch the pages.
Cautions when using the Optical TOUCH CRUISER
Do not operate the Optical TOUCH CRUISER using a pointed metallic
object such as a pen tip. May cause scratches or a failure of the
sensor.
Note that putting a sticker, etc. to the operating range may cause a
malfunction.
Setting whether to use Optical TOUCH CRUISER
<Usage settings>
1
In the Custom menu, select [Settings]/[General
settings]/[TOUCH CRUISER set]/[Usage settings].
e.g.) Custom menu
screen
2
Select the setting/t.
Setting pointer speed/scroll speed
<Pointer speed/Scroll speed>
1
In the Custom menu, select [Settings]/[General
settings]/[TOUCH CRUISER set]/[Pointer speed]/
[Scroll speed].
2
Select the speed/t.
Setting and selecting menu
Set, change or save functions from the menu screens.
e.g.) Basic menu
Menus are classified by function (nP. 446).
screen
The explanations in this manual are based on how to retrieve a function
from the Custom menu.
35