Docomo SH-07A Instruction Manual page 18

r Strap ring
s Main camera
Use to shoot still pictures or moving pictures (nP. 200).
Use to send a camera image shot during a Videophone call to the
other party (nP. 52).
t Picture Light
Illuminates/Flashes while activating the camera (nP. 200).
Illuminates/Flashes during shooting (nP. 206, P. 209).
u Infrared port
Use for the Ir communication (nP. 354).
Use for the Ir remote control (nP. 358).
v b mark
The IC card is included (The IC card cannot be removed). Use
Osaifu-Keitai holding the b mark up to the scanning device
(nP. 289).
Use to send and receive data via the iC communication (nP. 358).
w Back cover (nP. 42)
A radio frequency-preventing sticker is attached on the back of the
back cover. Do not peel off this sticker.
■ Key operations for stand-by display
Operate each key in the stand-by display to perform the following action.
Key Operations
To display iMenu
i
(nP. 160)
To display Mail menu
m
(nP. 126)
To activate camera
C
(nP. 206)
To display phonebook
a
(nP. 83)
To display start menu
t
(nP. 36)
To display the Redials list
r
screen (nP. 56)
To display the Received
q
calls list screen (nP. 56)
26
Operations when pressing
for 1+ seconds
To display the i-appli software list
screen (nP. 263)
To display the compose message
screen (nP. 126)
To activate 1Seg (nP. 229)
To display the phonebook entry
screen (nP. 79)
To display the Lock selection
screen (nP. 115)
To display Sent messages history
(nP. 146)
To display Received messages
history (nP. 146)
Key Operations
To display the i-Widget
o
screen (nP. 285)
To display Shortcut menu
p
(nP. 382)
To display the phone
s
number entry screen
(nP. 53)
H
–
c
To display channel list (nP. 191)
1
To enter 1
2
To enter 2
3
To enter 3
To enter 4
4
To enter 5
5
To enter 6
6
To enter 7
7
To enter 8
8
To enter 9
9
0
To enter 0
b
To enter
*
To enter #
#
Operations when pressing
for 1+ seconds
To display the earpiece volume
adjustment screen (nP. 89)
To set the Eco mode (Power saver)
(nP. 97)
To turn off the power * (nP. 48)
To execute assigned functions
(nP. 382)
To activate the Quick Stand-by
Display Setting mode (nP. 94)
To set font size collectively
(nP. 105)
To turn on/off the Bluetooth power
(nP. 396)
To display the Voice memos/
Recorded messages screen
(nP. 71, P. 385)
To start to use 2in1 (nP. 420)
To switch 2in1 mode (nP. 421)
To reset Kisekae Tool settings
(nP. 101)
To reset Font style setting
(nP. 105)
To enter +
To enable/disable the Public mode
(Drive mode) (nP. 67)
To enable/disable the Manner
mode (nP. 93)