JVC LT-19DK8WJ Instructions Manual page 11

• If the Quick Setup menu does not
appear this is because your TV has
already been turned on for the first
time. Use the "Channels Installation"
and "Auto Program" functions to make
the initial settings. For details, see
"Channels Installation" on page 30 and
"Auto Program" on page 41.
• In Ireland and some parts of the UK,
Digital terrestrial broadcasting (DVB-
T) cannot be received. If you are in
these areas, press the TV/DTV button
and see "Auto Program" on page 41 to
set up Analogue TV programmes.
3 Press the 4 button to choose
Antenna Power, and press the 2
and 3 buttons to turn on or off the
power supply from the TV to the
antenna. Then press the 4 button
Quick Setup
Country
Antenna Power
Analog Search
Choose a suitable option according to the
type of antenna you use for DVB-T
reception.
4 Press the 2 and 3 buttons to
choose whether the TV should
continue to perform Analogue TV
channel search after the DTV
channel installation is complete
Quick Setup
Country
Antenna Power
Analog Search
United Kingdom
Off
Yes
United Kingdom
Off
Yes
5 Press the OK button
The Digital terrestrial broadcasting
(DVB-T) channel full-scan installation
starts, and channels which can be received
are automatically registered.
Channels Full Scan
TV channels: 46 Radio channels:
BBC One BBC Radio 1
BBC Two 1Xtra BBC
ITV 1 BBC Radio 2
Channel 4 BBC Radio 3
Five BBC Radio 4
ITV 2 BBC Five Live
BBC Three BBC Five Live Sports Extra
Ch 45: 666MHz - OFFSET: None - BAND: 8MHz
Scanning in Progress
Signal Level
Signal Quality
6 If Yes is chosen in step 4, the
following screen will display
Search Successfully finished.
Analogue TV programme list empty.
Proceed to Analogue TV search
25 seconds to go.
• If No is chosen in step 4, you will see
the screen below. Press the BACK
button to skip Analogue TV search.
Search successfully finished.
Analogue TV programme list empty.
Proceed to Analogue TV search
The first DTV programme picture will
display on the screen.
Setting up your TV
8
No
11