Advertisement
Step 15: Continued
You will need for this page:
SS
(QTY: 32)
1
Working one (1) Gable at a time, lift Left and Right Gables into place on top of Rear Wall
Angle and Front Header. Gables must go under Side Wall Angles. Secure using seven (7)
Stone Screws per Gable.
2
Join Left and Right Gables together using two (2) Stone Screws in the second and third holes
from the bottom. Apply Weather Stripping along the mating edge of the Left and Right Gable
as shown. Cut the Weather Stripping to length. Repeat for opposite side.
1
67293
Weather
Stripping
6
29
29P
Gables must go under
Side Wall Angles.
Advertisement
