Vertex Standard VXR-7000 Service Manual page 11

Ch: Channel Number
This number (1 - 16) is used to identify the channel. Chan-
nel numbers occur in sequence, and their order can not be
changed.
Double-click the left mouse button on the number to
toggle the operation of the channel (except "Ch1").
Rx Freq: Edit Receive (or simplex) Frequency
Use the [ 0 ] - [ 9 ] keys to enter the desired channel fre-
quency directly, and press the [ E
CTCSS Decoders: Toggle CTCSS Decoder ON/OFF, sets
CTCSS Frequency
Double-click the left mouse
button to display the "Tone Se-
lect" window, click the left mouse
button on the desired tone, then
click the left mouse button on the
[ OK ] switch to accept the select-
ed tone.
DCS Decoders: Toggle DCS Decoder ON/OFF, sets DCS
Code #
Double-click the left
mouse button to display
the "Coded Select" win-
dow, click the left mouse
button on the desired DCS
code, then click the left
mouse button on the [ OK ]
switch to accept the select-
ed code.
VXR-7000 UHF Service Manual
] key.
NTER
CE27 Main Screen (Scrolled Right)
Operating Manual Reprint
W/N: Wide/Narrow Channel Spacing
This function selects the channel spacing environment in
which the VXR-7000 operates.
W (Wide) = 25 kHz Channel Spacing, ±5 kHz De-
viation.
N (Narrow) = 12.5 kHz Channel Spacing, ±2.5 kHz
Deviation.
Double-click the left mouse button to select the de-
sired channel spacing environment.
Clk Sft: Enable/disable the CPU Clock Shift
This function is only used to move a spurious response
"birdie" should it fall on a current frequency.
Double-click the left mouse button to toggle "yes" or
"no."
NSQ Mode: Noise Squelch Mode
This command selects the manner of setting of the Squelch
threshold level.
User = The squelch threshold level is fixed via the
"NSQ Lv" parameter (NSQ Lv: 0 [min.] ~
255 [max.]).
Prpgm = The squelch threshold level determined via
the dealer programming.
Double-click the left mouse button to select the de-
sired NSQ Mode.
NSQ Lv: Noise Squelch threshould level
Use the [ 0 ] - [ 9 ] keys to enter the desired Squelch thresh-
old level directly, and press the [ E
values are 0 (min.) ~ 255 (max.).
] key. Available
NTER
11