LG 55LX9500 Service Manual page 4

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LCD TV used LT03R
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature: 25 ºC ± 5 ºC(77 ºF ± 9 ºF), CST: 40 ºC ± 5 ºC
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-120 V~ 50 / 60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.
4. Module General Specification
No. Item
1 Display Screen Device
2 Aspect Ratio
3 LCD Module
4 Operating Environment Temp. : 0 deg ~ 40 deg
5 Storage Environment
6 Input Voltage
7 Power Consumption
=LCD(Module)+Backlight(LED)
8 Module Size
8 Pixel Pitch
9 Back Light
10 Display Colors
11 Coating
Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
Specification
137.5 cm(55 inch) wide color display module
16:9
137.5 cm(55 inch) TFT WUXGA LCD
Humidity : 0 % ~ 85 %
Temp. : -20 deg ~ 60 deg
Humidity : 0 ~ 85 %
AC 100-240V~, 50 / 60Hz
145 FHD, 480Hz(IOP LED)
1083.6(H) x 628.8(V) x 10.8 mm(D)
1.06 B(true) colors (10-bit)
3H(Hard coating), Anti-glare
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CE, IEC specification
- EMC :CE, IEC
LC550MUT-SCA1 : LX9500
LC550MUT-SCA1 : LX9500
LC550MUT-SCA1 : LX9500
- 4 -
Remark
LGE Internal Use Only