Table of Contents
Advertisement
Product
Instructions
Set program schedule for two time periods
(OCCUPIED, UNOCCUPIED)
To customize your 5+1+1 program schedule, follow these steps:
Weekday
1. Select HEAT or COOL using the SYSTEM key.
NOTE: You have to program heat and cool each
separately.
2. Press MENU.
3. Press SET SCHED. NOTE: Monday-Friday is
displayed and the OCCUPIED text is shown. You
are now programming the OCCUPIED time period
for the weekday setting.
4. Time is flashing. Use the
your time selection for the weekday OCCUPIED
time period. NOTE: If you want the fan to run
continuously during this time period, select ON with
the FAN key. If you want to use IAQ mode during
this time period, select IAQ with the fan key.
5. Press NEXT STEP.
6. The setpoint temperature is flashing. Use the
–
or
key to make your setpoint selection for the
weekday OCCUPIED period.
7. Press NEXT.
8. Repeat steps 4 through 7 for weekday
UNOCCUPIED time period.
Saturday:
9. Repeat steps 4 through 7 for Saturday OCCUPIED
time period and for Saturday UNOCCUPIED time
period.
Sunday:
10. Repeat steps 4 through 7 for Sunday OCCUPIED time
period and for Sunday UNOCCUPIED time period.
To customize your 7 day program schedule, follow these steps:
Monday
1. Select HEAT or COOL using the SYSTEM key. You
have to program heat and cool each separately.
2. Press MENU.
Viega LLC, 12303 Airport Way, Ste. 395 • Broomfield, CO 80021 • Ph: 800-976-9819 • Fax: 800-976-9817
PI-PR 566441 1017 (Multifunctional Thermostat) (EN ES FR)
+
–
or
key to make
+
3. Press SET SCHED. NOTE: Monday is displayed
and the OCCUPIED text is shown. You are now
programming the OCCUPIED time period for the
Monday setting.
4. Time is flashing. Use the
your time selection for the Monday time period.
NOTE: If you want the fan to run continuously
during this time period, select the FAN key. If you
want to use IAQ mode during this time period,
select IAQ with the fan key.
5. Press NEXT.
6. The setpoint temperature is flashing. Use the
–
or
key to make your setpoint selection for the
Monday OCCUPIED period.
7. Press NEXT.
8. Repeat steps 4 through 7 for Monday
UNOCCUPIED time period.
Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday:
Repeat steps 4 through 8 for the remaining days of the week.
A note about auto changeover:
If in Auto you have the ability to switch between Auto
Heat or Auto Cool by pressing the System key. This can
be done once the current mode has reached its setpoint.
For example: If in Auto Heat, the heat setpoint must be
satisfied before the thermostat will allow you to switch to
Auto Cool. You can switch out of Auto by holding down
the System key. To get back into Auto, you must toggle
the System key to Auto.
A note about programmable fan:
The programmable fan feature will run the fan
continuously during any time period it is programmed to
be on. This is the best way to keep the air circulated and
to eliminate hot and cold spots in your building. If using
IAQ Mode, set fan to IAQ for any time period desired.
+
–
or
key to make
+
17 of 18
Advertisement
Table of Contents
