Table of Contents
Advertisement
Product
Instructions
You can use the table below to plan your customized
program schedule if using 5+1+1.
Programming Table
Day
of the
Week
Events
Weekday
Wake/OCC1
Leave/UNOCC1
Return/OCC2
Sleep/UNOCC2
Saturday
Wake/OCC1
Leave/UNOCC1
Return/OCC2
Sleep/UNOCC2
Sunday
Wake/OCC1
Leave/UNOCC1
Return/OCC2
Sleep/UNOCC2
Set program schedule for four time periods
(WAKE, LEAVE, RETURN, SLEEP or OCCUPIED 1,
UNOCCUPIED 1, OCCUPIED 2, UNOCCUPIED 2)
To customize your 5+1+1 program schedule, follow these
steps:
Weekday
1. Select HEAT or COOL using the SYSTEM key.
NOTE: You have to program heat and cool each
separately.
2. Press MENU.
3. Press SET SCHED. NOTE: Monday-Friday is
displayed and the WAKE/OCC1 icon is shown. You
are now programming the WAKE/OCC1 time period
for the weekday setting.
4. Time is flashing. Use the
make your time selection for the weekday WAKE/
OCC1 time period. NOTE: If you want the fan to run
continuously during this time period, select ON with
the FAN key. If you want to use IAQ mode during
this time period, select IAQ with the fan key.
5. Press NEXT.
Viega LLC, 12303 Airport Way, Ste. 395 • Broomfield, CO 80021 • Ph: 800-976-9819 • Fax: 800-976-9817
PI-PR 566441 1017 (Multifunctional Thermostat) (EN ES FR)
Setpoint
Setpoint
Temperature
Temperature
Time
(Heat)
(Cool)
+
–
or
key to
6. The setpoint temperature is flashing. Use the
–
or
key to make your setpoint selection for the
weekday WAKE/OCC1 period.
7. Press NEXT.
8. Repeat steps 4 through 7 for weekday LEAVE/
UNOCC1 time period, for weekday RETURN/OCC2
time period, and for weekday SLEEP/UNOCC2 time
period.
Saturday:
9. Repeat steps 4 through 7 for Saturday WAKE/OCC1
time period, for Saturday LEAVE/UNOCC1 time
period, for Saturday RETURN/OCC2 time period,
and for Saturday SLEEP/UNOCC2 time period.
Sunday:
10. Repeat steps 4 through 7 for Sunday WAKE/OCC1 time
period, for Saturday LEAVE/UNOCC1 time period, for
Sunday RETURN/OCC2 time period, and for Saturday
SLEEP/UNOCC2 time period.
To customize your 7 day program schedule, follow these steps:
Monday
1. Select HEAT or COOL using the SYSTEM key. You
have to program heat and cool each separately.
2. Press MENU.
3. Press SET SCHED. NOTE: Monday is displayed
and the WAKE/OCC1 icon is shown. You are now
programming the WAKE/OCC1 time period for the
Monday setting.
4. Time is flashing. Use the
your time selection for the Monday WAKE/OCC1
time period. NOTE: If you want the fan to run
continuously during this time period, select ON with
the FAN key. If you want to use IAQ mode during
this time period, select IAQ with the fan key.
5. Press NEXT.
6. The setpoint temperature is flashing. Use the
–
or
key to make your setpoint selection for the
Monday WAKE/OCC1 period.
7. Press NEXT.
8. Repeat steps 4 thru 7 for Monday LEAVE/UNOCC1
time period, for Monday RETURN/OCC2 time period,
and for Monday SLEEP/UNOCC2 time period.
Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday:
Repeat steps 4 through 8 for the remaining days of the week.
+
+
–
or
key to make
+
16 of 18
Advertisement
Table of Contents
