Page 1
145x210mm MRP5613-002 FS40-12HR 颜色:四色 说明书 365 20150506 16'' INVERTER STAND FAN MODEL: ESF-E1637DC(WH) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service.
CAUTION Read Rules for Safe Operation and Instructions Carefully. WARNING 1. If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. 2. Indoor use only. 3.
PART FIGURE Blade Rear Guard Front Guard Motor Shaft Center Piece Remote Control Hook Circlip Control Part Clip Fastening Knob Plastic Nut Tube Tighten Loosen Female terminals Spinner Round Base Butterfly Screws For Fixed Base Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between the real object and the illustration in the drawing shall be subject to the real subject.
Page 4
GUARD & FAN BLADE ASSEMBLY 1. Unscrew the spinner clockwise (or take the spinner out from the bag) and the plastic nut counter clockwise to remove both of them. Fix the rear guard to the motor then tighten the plastic nut again. (Fig.4) 2.
Page 5
“ ” OSC KEY After the fan starts, repeatedly touch this button to start or stop oscillation. “ ” PRO KEY Under power-on state, timed power-off can be set. Press the PRO button; it starts the timing power-off state. "Timing" and icon displayed on the fan display will flash once per second, the rotate the drive plate clockwise, the fan display will display 0.5 →...
IV. Height Adjustment Lowing: lift up the head with a hand, unscrew the fastening knob counterclockwise with the other hand, slowly lower the head to an appropriate height, and tighten the knob clockwise. Rising: lift up the head with a hand, unscrew the fastening knob counterclockwise slowly with the other hand, rises up the head to a proper height, and tighten the knob clockwise.
MAINTENANCE INSTRUCTION The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is needed. 1. Before cleaning and assembling, fan must be unplugged. 2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust.