Advertisement
Maintenance
Installing air cleaner and air inlet grid:
1. Mounting the filter: opposite of dismantling the filter (as shown in
Fig. 3 above).
2.Mounting the air inlet grid: as shown in the right figure, clip the
locks on the grid as directed by the arrows, put the side with the
hinges into the lock port, and then put the side with locks into
the panel frame. Release the locks to position the grid after
determining that the grid is flush with the bottom of the panel
frame.
Cleaning the air outlet port and the shell:
• Do not use gasoline, benzene, diluents, polishing powder or liquid insecticide to clean them.
• Do not clean them with hot water of over 122°F(50°C) to avoid fading or distorting.
• Wipe them with a soft dry cloth.
• Water or neutral dry cleaner is recommended if the dust cannot be removed.
Cleaning Louvers:
• To avoid damage to the louvers care should be taken when cleaning. Use damp cloth and mild detergent.
Attention
5
locks
insert air inlet grid
hinge
lock port
Advertisement
