Table of Contents
Advertisement
UP744.book Page 14 Friday, November 5, 2004 4:22 PM
Connect the expansion handset's charger
The handset is powered by a rechargeable
note
battery pack. The battery recharges
automatically when the handset is placed
in the charger.
•Use only the supplied
AD-xxxx AC adapter.
Do not use any other
1) Connect the AC adapter to the DC IN 9V jack
AC adapter.
and to a standard 120V AC wall outlet.
2) Set the charger on a desk or tabletop, and
place the handset in the charger with the
top panel facing forward.
3) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see
that the AC adapter is plugged in and the
•Your phone maybe
handset makes good contact with the base
compatible with other
Uniden 5.8Ghz Digital
charging contacts.
Expandable Systems.
4) Charge the handset battery pack for at least
Look for the technology
15-20 hours before using your new cordless
icon on our boxes or
telephone for the first time.
visit our website for a
list of compatible
models.
Register the Handset
Handsets supplied with the phone are registered to the base by the factory. When
charged, pre-registered handsets display a handset ID number. Handsets that have
not been registered display MUST place the handset in base to register! Models may
vary, refer to owners manual for
handset ID will be assigned. Only one handset can be registered at a time.
w w w . u n i d e n . c o m
in the LCD, and
in the sub LCD. When you register an extra handset to the base, the
E x pa ndi n g Y ou r Ph o ne [ 1 4 ]
Advertisement
Table of Contents
