Figure 21 Co-Mounting The Bbu With The Tropos 1410 - ABB Tropos 1410 Installation Manual

Installation Procedures
You can co-mount the BBU with the Tropos 1410 (preferred) or mount the BBU separately on a
metal or wood pole. When using both the BBU063001 and the PS079001, the BBU must be co-
mounted with the Tropos 1410 and the PS079001 mounted on the pole or other surface.
Co-mount the BBU with the Tropos 1410
1. Follow the instructions in
to the pole.
Place the BBU mounting bracket between the pole bracket and the Tropos 1410 mounting
2.
bracket. Secure with two each 10-32 screws
Mount and secure the Tropos 1410 to the mounting bracket with two each 10-32 screws.
3.
Connect the data and power output cable to the Ethernet port on the Tropos 1410.
4.
5. Attach the PoE input cable either to the data and output port or to a PS079001 to the power
output cable of a TLP4820.
Figure 21
BBU
Data and
power out
Tropos 1410 Installation Guide
Chapter 2, "Installing the Tropos 1410,"
Co-Mounting the BBU with the Tropos 1410
Tropos 1410
BBU
Ethernet port
DC power input from TLP4820
or PS079001
to secure the pole bracket
(Figure 21).
Pole bracket
Chapter 3
46