Figure 18 Co-Mounting The Ps079001 With The Tropos 1410 - ABB Tropos 1410 Installation Manual

Installation Procedures
You can co-mount the PS079001 with the Tropos 1410 or mount the PS079001 separately on a
metal or wood pole. When used with the BB063001 Battery Backup Unit (BBU), the PS079001
should be mounted remotely.
Co-mount the PS079001 with the Tropos 1410
1. Follow the instructions in
to the pole.
Place the PS079001 mounting bracket between the pole bracket and the Tropos 1410
2.
mounting bracket. Secure with two each 10-32 screws
Mount and secure the Tropos 1410 to the mounting bracket with two each 10-32 screws.
3.
Connect the data and power output cable to the Ethernet port on the Tropos 1410.
4.
5. Connect the AC power cable to the AC power source.
Figure 18
PS079001
mounting
plate
PS079001
Tropos 1410 Installation Guide
Chapter 2, "Installing the Tropos 1410,"
Co-Mounting the PS079001 with the Tropos 1410
Tropos 1410
AC power input
to secure the pole bracket
(Figure 18).
Pole bracket
(supplied with the Tropos 1410)
Chapter 3
42