Step 1.3: Connect The Power Adapter; Step 1.4: Insert The BatterEs - D-Link DHA-130 User Manual

Secton 2 - Installaton
Connect the phone cable to the LINE port on the back of the
DHA-130 base staton, and connect the other end to your
wall jack.
Remove the battery cover from the handset by sldng the cover downwards. Insert the batteres
n the drectons shown by the cons on the handset. Replace the battery cover and connect the
phone to the base staton to charge the batteres.
You need to leave the phone on the charger for at least 14 hours to fully charge the batteres.
Warning: Only use the ncluded rechargeable batteres or NMH 750mAh AAA batteres n the
DHA-130 handset. Do not use alkaline or other types of rechargeable batteries, as they may
leak or explode when the DHA-130 handset s placed on the base staton to charge.
D-Lnk DHA-130 User Manual

Step 1.3: Connect the Power Adapter

Step 1.4: Insert the Batteres

9