General Description Of Machine; B1 General Description; Technical Data; C1 Main Technical Characteristics - Electrolux NHT8 Manual

B
B1 General description
The dishwasher is suitable for washing dishes, glasses, cups, cutlery, trays, containers and receptacles in plastic
and/or steel used for preparing, cooking and serving; as well as various cooking utensils in ceramic and/or metal.
The machine is designed for the above-mentioned applications. Under no circumstances may the machine be used
for other applications or ways not provided for in this manual.
This equipment has been produced to meet the needs for a better work environment and economical efficiency.
These dishwashers are used in restaurants, cafeterias, cooking centres and large institutions.
The special dish racks, that can be equipped with various inserts, offer practical and easy use for obtaining excellent
washing results. The electronic system enables complete supervision of the washing process. The control panel
also has a display that shows the operating parameters and signals any anomalies.
Systems for scraping and wetting the dishes (e.g. manual prewash spray) and areas for sorting and arranging them
in the racks must be arranged ahead of the dishwasher.
C
C1 Main technical characteristics
MODEL
Supply voltage:
- convertible to
- convertible to
Frequency
Max. power. absorbed
power absorbed as factory setting
Power absorbed with min. supply water
temperature of 65°C / 149°F
Boiler heating elements
Tank heating elements
Water supply pressure
Water supply temperature:
- for models without ESD
- for models with ESD
Water supply hardness for models without
incorporated continuous water softener
Water supply hardness for models with
incorporated water softener
Electric conductivity of water for models without
incorporated continuous water softener
Concentration of chlorides in water
Rinse cycle water consumption
Boiler capacity
Tank capacity
Cycle duration in High Productivity mode ($)
Cycle duration in ETL-Sanitization mode ($)
Legal noise level Leq
Protection rating
Net weight without/with ESD
Power supply cable
Supply cord diameter (min. - max. value)
Latent heat without/with ESD
Sensible heat without/with ESD
(*) = If activated by software, coincidence of tank and boiler heating elements.
(**) = Activatable via software only by a specialized technician.
(***) = With water supply temperature at 65°C / 149°F.
($) = In models with energy saving device (ESD) cycle duration is extended by 11 seconds.
(°) = For the model EHT8IELG6: 380-400V 3N convertible 220-230V 3 or 220-230V 1N.

Table 1 Main technical characteristics, performance and consumption

10

GENERAL DESCRIPTION OF MACHINE

TECHNICAL DATA

NHT8/ EHT8/
KHT8
V 400V 3N
V 230V 3
V 230V 1N
Hz 50
kW 12,9 (*)
kW 9,9
kW 6,9 (**)
kW 9,0
kW 3.0
kPa [bar] 50-700 [0,5-7]
°C/ °F 10-65 / 50-149
°C/ °F
°f/°d/°e 14/8/10 max
°f/°d/°e 53.4/30/37.5 max
S/cm
< 400
ppm < 20
l 2,0
l 12
l 24
sec. 45(***)-84-150
sec. 57(***)-84-150
dB(A) <68
IP25
kg 106 / -
H07RN-F
mm 18 - 25
kWh 0,5/ -
kWh 2/ -
ZHT8I / AHT8I /
EHT8I / NHT8I
400V 3N(°)
230V 3(°)
230V 1N(°)
50 or 60
12,9 (*)
9,9
6,9 (**)
9,0
3,0
50-700 [0,5-7]
10-65 / 50-149
- 10-20 / 50-68
14/8/10 max
53.4/30/37.5 max
< 400
< 20
2,0
12
24
45(***)-84-150
57(***)-84-150
<63
IP25
117 / 150
H07RN-F
18 - 25
0,5/ 0,35
2/ 1,49
EHT8M / EHT8M6/
EHT8IUSPH5 EHT8IUSPH6
400V 3 440V 3
- -
- -
50 60
12,9 (*) 12,9 (*)
9,9 9,9
- -
9,0 9,0
3,0 3,0
50-700 [0,5-7] 50-700 [0,5-7]
10-65 / 50-149 10-65 / 50-149
- -
14/8/10 max 14/8/10 max
- -
< 400 < 400
< 20 < 20
2,0 2,0
12 12
24 24
45(***)-84-150 45(***)-84-150
57(***)-84-150 57(***)-84-150
<68 / <63 <68 / <63
IPX5 IPX5
117 / - 117 / -
H07RN-F H07RN-F
18 - 25 18 - 25
0,5/ - 0,5/ -
2/ - 2/ -
ZHT8TIL/
EHT8TIL
400V 3N
230V 3
230V 1N
50
12,9 (*)
9,9
6,9 (**)
9,0
3,0
50-700 [0,5-7]
10-65 / 50-149
10-20 / 50-68
14/8/10 max
-
< 400
< 20
2,0
12
24
45(***)-84-150
57(***)-84-150
<63
IP25
119 / 152
H07RN-F
18 - 25
0,5/ 0,35
2/ 1,49