Working With The Touch Screen; Touch Screen Adjustments - Armor X7 User Manual

SECTION 3

Working with the Touch Screen

When the touch screen is active, the pressure of a stylus tip or fingertip against the screen is
used to duplicate actions with a two-button mouse.
Tapping with a stylus tip requires only light to moderate
pressure. It is possible to damage the pen tip and/or the display
by pounding the tip against the surface with too much force.
Wo r k in g w ith t h e To u c h S c r e e n
Table 6 lists mouse-type objectives you can perform using a passive stylus (not provided) or
fingertip with the touch screen.
MOUSE OBJECTIVE
Select tabs or open sub-menus.
Highlight a label or option.
Fill selection boxes.
Activate buttons.
Deselect highlighted objects or release multiple
objects
Start an application or open a folder.
Move an object on the desktop.
Open menu options.
Select multiple objects.
To u c h S c r e e n Ad ju s t m e n ts
You can change attributes related to use of a fingertip or passive stylus with the touch screen.
Select Start à Control Panel à Hardware and Sound à and click on the Touch Settings
utility, Pen and Touch utility and the Tablet PC Settings utility.
Refer to Your ARMOR X7 Software section in the X7 User's Guide for an explanation of these
attributes.
9711-26400-0001
GETTING STARTED
NOTE
Table 6. Stylus Actions.
Tap once
Tap outside the object(s)
Tap twice
Press over an object, hold contact with display,
drag pen and release pressure.
Press over icon or option and hold contact with
display without moving pen.
Press and hold contact with display, drag box
around objects.
EXPORT CONTROLLED – SEE PAGE 3
STYLUS ACTION
PAGE 61
Rev -