Table of Contents
Advertisement
Power input connector
Connect the DC Power Cable to this connector.
DISPLAY
The display shows the zone/ channel number and the 2 dots show various modes
of operation.
Display
Zone Display (Zone 1)
Channel Display (Channel 16)
Appears during Scan. (Sc)
Appears during the transceiver is
stunned. (St)
Appears when switch the
transceiver ON.
The Transceiver Password
function is programmed. (PS)
Appears when the Squelch Level
setting is activated. (SL)
Appears when the Talk Around
function is activated. (tA)
Appears when the Horn Alert
function is activated. (HA)
Appears when the Public
Address function is activated.
(PA)
Appears when the AUX function
is activated. (AU)
10
Description
Display
Appears when a channel is
added to the scan list. (cA)
Appears when a channel is
removed from the scan list. (cd)
Appears when the Lone Worker
function is activated. (Ln)
Appears during Send Data (dt)
Appears during the channel is
busy.
The selected channel is the
Priority channel. (P)
Appears when the Scrambler
function is activated. (Sr)
Appears when the Scrambler
code mode is activated. (co)
Appears when the Scrambler
code mode is activated. (co)
Appears when the Message is
completed. (Ed)
Description
Advertisement
Table of Contents
