Coaxial Cable Installation - Garmin GTX 45R Installation Manual

4.5

Coaxial Cable Installation

NOTE
Make sure the length is set for the necessary cable loss. Some antennas have minimum
cable loss specifications, that may need a cable longer than the physical run in the
aircraft.
Follow the steps below for installation of the coaxial cables.
1. Route the coaxial cable to the radio rack location keeping in mind the recommendations of
section 3.14.
2. Attach the cable in accordance with AC 43.13-1B chapter 11, section 11.
3. Trim the coaxial cable to the applicable length.
4. Install the coaxial connectors per the manufacturer's instructions.
190-01499-10
Rev. 1
GTX 35R/45R Installation Manual (Non-Certified Aircraft)
Page 4-7