Table of Contents
Advertisement
Distance
Install the heat pump as close to the swimming pool as possible to minimize the loss of
heat through the piping. Put it on a solid base and place the rubber blocks under the heat
pump to eliminate vibrations.
Installation of the valve
The placement of the chlorinator, water balance equipment, and the placement of
injectors of chemicals, are very important aspects of the installation. All addition of
chemicals have to be done downstream from the heat pump. Failure to protect the heat
pump unit from chemical damage is not covered by your warranty. A check-valve must be
installed between the heat pump and the chemical feeder to prevent back-siphoning of
chemically saturated water into the heat pump where it will damage the components.
Configuration
Note: the above piping connection is only an example for demonstration.
7
Advertisement
Table of Contents
