Installation; Operation - Bolton Tools ZX45 PD Operating Manual

INSTALLATION

(1) Ensure the headstock is as lower as possible, and be fixed on the column
tightly before moving machine. While moving machine, keep its balance
and safety.
(2) Don't mount the machine at the sunshine place to avoid the deformity of
machine and the loss of accuracy
(3) Mount machine to a sturdy table
or a solid concrete foundation, it's advisable that the base you choose
be well constructed to avoid any vibration during operation.
(4) Thoroughly clean the machine with a commercial degreaser, and then coat
all bright metal with a light lubricant to prevent corrosion.
(5) Level the surface of the worktable on both lengthwise and crosswise by
using a precision level.
(6) Remove the oil filler plug and fill the oil to the gear box until the
oil level reaches the middle of the oil fluid level indicator. Lubricate
all points

OPERATION

Notice: Check all parts and safety precautions for
1. Use of main machine parts
(1)Raise and lower the headstock on its rack and pinion mechanism by using
the head crank. When the desired height is reached, tighten the bolts
to avoid vibration.
(2)Head may be rotated 360°by loosening the same bolts mentioned above.
Adjust the head to the desired angle, and then tighten the heavy duty
head lock nuts.
(3)For auto-tapping electrical system, the knob is seated for MILLING
& DRILLING, TAPPING AND STOP. The mushroom head red push button for
emergency stop while milling and drilling, or reverse while tapping,
the green push button for starting.
(4)Feed the spindle using spindle feeding handle, micro feed the spindle
proper condition before operation
.
6