Antenna Alignment Procedure - Fujitsu BroadOne GX4000 R3.0 Series User Manual

Commissioning Test
3.6

Antenna Alignment Procedure

Step-1: Connecting WebLT to ODU RJ-45 Jack
Step-2: IP Address Setting on WebLT
3-6

Connect PC with ETH connector (RJ-45 jack) on ODU by LAN cable.

Open WebLT
For detailed connection, refer to Chapter 5, Section 5.1.

Click Configuration > System > IP

Set IP Address and IP Mask
IP Address:
IP Mask:
Fujitsu and Fujitsu Customer Use Only
RJ-45 Jack
192.168.0.1 (default)
255.255.255.0
BroadOne GX4000 Manual (R3.0) issue 1.03